How To Assemble Your Propagation Station
Thanks for purchasing (or congratulations on being gifted!) a Cooper&Smith Propagation Station. Wherever you’re at on your plant propagation journey, we’re so excited to be part of it.
In this How To Guide we’ll show you how to assemble each of our propagation stations with both assembly videos and written instructions. If something isn’t working for you or you’re missing a component, contact us or start a live chat to get in touch.
Jump To Propagation Station:
- Paisley Propagation Station
- Harper Propagation Station
- Fleur Propagation Station
- Arwen Propagation Station
- Clementine Propagation Station
- Florence Propagation Station
- Ella Mae Propagation Station
- Madeline Propagation Station
Paisley Propagation Station
Watch this video on how to assemble your Paisley Propagation Station.
Alternatively, follow this step-by-step guide:
- Place the small U-frame inside the large U-frame
- Align the top hole of the small U-frame with the middle hole of the large U-frame
- Insert one of the two supplied bolts through the hole
- Screw on the fastener and tighten
- Repeat with the other side of the U-frame
- Thread the rod through the top hole of one side of the large U-frame
- Slide on an o-ring, glass vessel and another o-ring
- Repeat with any additional vessels, shuffling o-rings and vessels when necessary
- Thread the rod through the other side of the large U-frame
- Space the o-rings and vessels evenly on the rod
- Finish by adding o-rings to both ends of the rod
- Fill the vessels with water and add your favourite plant cuttings
Harper Propagation Station
Watch this video on how to assemble your Duo Split Harper Propagation Station.
Alternatively, follow this step-by-step guide:
Harper Solo
- Insert the rod into the frame with the longest section over the base and 2-3 millimeters extending out the other side
- Fix rubber o-rings to the rod on either side of the frame, securing it in place
- On the longest section of the rod over the base, slide on an o-ring, glass vessel and another o-ring
- Fill the vessel with water and add your favourite plant cuttings
Harper Duo Even
- Insert the rod into the frame with an even amount of rod extending out each side
- Fix rubber o-rings to the rod on either side of the frame, securing it in place
- On one side, slide an o-ring, glass vessel and another o-ring onto the rod
- Repeat with the rod on the other side of the frame
- Fill the vessels with water and add your favourite plant cuttings
Harper Duo Split
- Insert a rod into the top hole of the frame with only 2-3 millimeters extending out the other side
- Fix rubber o-rings to the rod on either side of the frame, securing it in place
- Insert the other rod into the bottom hole of the frame in the opposite direction with only 2-3 millimeters extending out the other side
- Fix rubber o-rings to the rod on either side of the frame, securing it in place
- On one rod, slide on a rubber o-ring, glass vessel and another o-ring
- Repeat for the other rod, which extends in the opposite direction
- Fill the vessels with water and add your favourite plant cuttings
Fleur Propagation Station
Watch this video on how to assemble your Fleur Propagation Station.
Alternatively, follow this step-by-step guide:
- Fit the rubber feet to the widest end of each set of metal legs
- Turn the frame over and locate the leg holes on either end of the frame
- Use pressure (if necessary) to spread the metal legs and insert into the leg holes
- Repeat with the other end of the frame
- Fill the glass vessels with water and place into the frame
- Add your favourite plant cuttings
Arwen Propagation Station
Watch this video on how to assemble your Arwen Propagation Station.
Alternatively, follow this step-by-step guide:
- Place the glass vessels into the frame
- Fill the vessels with water
- Add your favourite plant cuttings
Clementine Propagation Station
Watch this video on how to assemble your Clementine Propagation Station.
Alternatively, follow this step-by-step guide:
- Place the glass vessels into the frame
- Fill the vessels with water
- Add your favourite plant cuttings
Florence Propagation Station
Watch this video on how to assemble your Florence Propagation Station.
Alternatively, follow this step-by-step guide:
- Place the glass vessels into the frame
- Fill the vessels with water
- Add your favourite plant cuttings
Ella Mae Propagation Station
Watch this video on how to assemble your Ella Mae Propagation Station.
Alternatively, follow this step-by-step guide:
- Place the glass vessel into the frame
- Fill the vessel with water
- Add your favourite plant cutting
Madeline Propagation Station
Watch this video on how to assemble your Madeline Propagation Station.
Alternatively, follow this step-by-step guide:
- Place the glass vessel into the base
- Fill the vessel with water
- Add your favourite plant cutting